Thermal Temperature Detection

ThruScan Thermal Scan Module

Operates as standalone or with ThruScan Security Metal Detectors
WiFi Connection is available optionally (ThruScan TSM-LCD-Wf-PC Thermal Scan Module) ThruScan High Fever Detection Warning During Epidemic Infection Threats

CONTACTLESS INSTANTANEOUS

Automatic Human Temperature Measurement ThruScan Thermal Module

Ability to operate together with ThruScan Metal Detectors. Thus contactless, instantaneous screening of people at the same point for both Dangerous Metal Objects and High Fever Detection. This eliminates the risk of contamination as there is no need to send people with high fever to a different area. The Thermal Module can be implemented to our Medium and High Segment Security Metal Detectors.

Thermal Scan Module has been designed to be used in high people circulation areas Education Institutions.
Hospitals
Airports
Consulates etc..

ThruScan Thermal Module:

1. Detection of electromagnetic radiation with Microbolometer technology in the Infrared spectrum.
2. Contactless between 1 – 5 meters, instantaneous high fever screening – temperature measurement at approximately 800 different points.
3. Thermography, thermal imaging, thermal video features (optional).
4. Green, Yellow, Red (Presence of FEVER) with LED Lights and audible alarm functions, the easiest way to use for the operator.
5. Eliminate / isolate / in a room, glass room, cabin or turnstile, ability to quarantine thanks to the relay output.
6. Easy programming and selection buttons.
7. Remote screening possibility from separate isolated place with a tablet, computer or Kiosk PC monitoring (optional).
8. Auto-Calibration. Does not require additional calibration.
9. Up to 10 hours operation ability with battery.

SECURITY SCREENING

Metal detector technology was adapted to screen airline passengers. Mining metal detectors housed in a large cylindrical pipe were used to make a commercial walk-through security detector. This eventually led to the development of the rectangular gantry, now standard at airports. Both alternating current and pulse systems are used, and the design of the coils and the electronics has moved forward to improve the discrimination of these systems. It is possible to indicate the approximate height of the metal object above the ground, enabling security personnel to more rapidly locate the source of the signal. Smaller hand held metal detectors are then used to locate a metal object on a person more precisely. DFMD’s are designed for high throughput with fewer unnecessary alarms. Targeted objects, such as guns and knives, are consistently and accurately detected, while personal items such as keys, coins, belt buckles and eyeglasses can pass through without causing an alarm.

DFMD TYPES

Door Frame metal detectors (DFMDs) are of two types

1. Single zone DFMD
2. Multi-zone DFMD provide multi zone detection

A Multi zone DFMD will identify whether the target is on the left side or right side of the person. If an individual walks through the DFMD with a concealed weapon located at their ankles, both the single and multi zone DFMD will locate the target. The difference between the Single zone DFMD and Multi-zone DFMD is that the multi zone detector will be able to identify the location of the target, on either the left or right side of the individual.